After Service Care

Vehicle · Residential · Commercial Window Film & Wrap Care

Film Drying Time

  • Do not clean the window film for 14 days after installation.
  • Drying time may vary depending on weather conditions.
  • During the drying process, small water beads or a hazy appearance may be visible. This is normal and will disappear as the film dries.
  • Do not attempt to dry or remove moisture trapped at the bottom of the film. It is important that the film dries naturally.

Cleaning & Care Instructions

To get the most value and lifespan out of your window film, please follow the cleaning and care instructions below:

  • Always use a clean, soft microfibre cloth to wipe and dry window film surfaces.
  • The recommended cleaning solution is 10ml Johnson’s baby shampoo diluted with 1 litre of water.
  • Clean using a damp microfibre cloth, followed by a second soft cloth to dry the surface.
  • Do not use bristle brushes, squeegees, abrasive sponges, or any materials that may contain dirt particles.
  • Avoid using the same cleaning materials for both interior and exterior windows.
  • Avoid strong chemicals, including standard window-cleaning products.
  • Avoid sharp objects and pet claws coming into contact with the film.

Need Assistance?

If you have any questions or concerns regarding your window film or wrap, please contact us:

Rolleston Tinting Ltd
Phone: 021 640 930
Email: info@rollestontinting.co.nz
Website: www.rollestontinting.co.nz

© 2026 All rights reserved.
Created by CodeStudioWorks.com